Price: $15.99
(as of Apr 20, 2025 00:44:53 UTC – Details)

The KINGMODEL Bidirectional Brushed 5A ESC is a micro size Bidirectional Brushed electronic speed controller, widely used for RC Model DIY Boat/tank/Car Brushed Motor Spare Parts 1/35 RC model cars, tanks, 4WD RC cars etc. Compatible with 130 180 brushed Motors, it can be go forward and backward freely. Mode adjusted: No Brake Mode / Medium Brake Mode. It is just a good job man! Also , it can be worked with 130/180 brush motor.
Safety Arming: the motor will not rotate until the throttle lever is unlocked at the midpoint.
Over-heat protection: When the temperature of the ESC is over 130 Celsius degree, the ESC will gradually reduce the output power.

Specification:
5A Bidirectional Brushed ESC:
Continuous Current: 5A
Burst Current (10S): 10A
Lipo Battery (Cell): 2S-4S
Dimension L*W*H(mm): 32x23x8 mm
Weight Wire Included: 11.9g
BEC Output: 1A/5V
Mode adjusted: No Brake Mode / Medium Brake Mode
Applicable motor:130 / 180 Brush motor

Operation guide:
1. Remote control throttle midpoint area set to PWM amount 1500us (+50-50), throttle stroke minimum 1000us, maximum 2000us.
2. ESC unlock
1) Connect the motor and receiver correctly as illustrated, when the ESC is powered on, there is a prompt tone (a “beep” sound from the motor).
2) The throttle channel must be started in the middle point area till you hear the sound “123” the ESC is unlocked.
3. When the signal is lost, the electric control motor automatically stops after 2S, for safety reasons, the throttle of the remote control also needs to be returned immediately.
4. Mode set (Shift switch to exchange).
F/B/R mode
Switching to F/B/R mode, the car moves forward with forward throttle, moves backward with reverse throttle, and the throttle lever returns to the midpoint area with motor braking, which has a braking effect. The output of the forward and reverse are equally large, it’s suitable for climbing cars and slow driving.
F/R mode (Default mode)
This mode provides driving and reversing functions. When the throttle stops at the midpoint area, the electric control does not drive the motor, but the car can slide by inertia.
Package includes:
1pcs x 5A Bidirectional Brushed ESC.

Two modes of output: F/B/R and F/R modes, fit for most RC Models’ Enthusiasts. And works well with the 130/180 brushed motors in RC boats, tanks, cars, multirotors, helicopter, drones etc. 2S-4S LiPo batteries for versatile power control
Over-heat protection & throttle signal loss protection, the ESC will cut-off the output power if the throttle signal is lost, the motor will stop rotate
With High-Performance Dual Current Output, Continuous Current: 5A, Burst Current (10S): 10A, Engineered with anti-overload protection for extended durability
Ultra-compact (32x23x8mm) and lightweight (11.9g) ESC minimizes bulk while maximizing airflow. Ideal for tight spaces in RC tracked vehicles and multirotors
High-quality PCB and heat-resistant casing ensure reliability under intense use